How to Add Coolant: 1999 Mercury Sable LS 3.0L V6 Sedan

Mercury Sable Model Years - 1996, 1997, 1998, 1999

How to check and refill coolant in the 1999 Sable with step-by-step instruction to find the fill line on the reservoir

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

1999 Mercury Sable LS 3.0L V6 Sedan Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

1999 Mercury Sable LS 3.0L V6 Sedan Brake Fluid Check Fluid Level

Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping

1999 Mercury Sable LS 3.0L V6 Sedan Fuse (Interior) Check

Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!

1999 Ford Taurus LX 3.0L V6 Car Seats Install

You love your kids right? See how to properly secure their car seat.

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Adding engine coolant (also known as antifreeze) to your 1999 Mercury Sable is pretty easy. Engine coolant / antifreeze circulates through your engine to keep it cool in the summer but won't freeze in the winter. Make sure to check your engine when it is cold for an accurate reading. The video above shows you where the coolant reservoir in your Sable is located and how to add coolant / antifreeze. Be sure to check your owners manual to determine the correct type of fluid to add - for Mercurys, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant / antifreeze with distilled water so that you have a combination of 50% coolant and 50% water. Some coolants will come premixed-that is, you don't need to add any water. These coolants will typically say 50/50 or pre-mixed on the front of the coolant bottle.

Removing the coolant reservoir cap on a warm engine could cause the cap to fly off at a high rate of speed and fluid to spray out of the reservoir. Always wear safety goggles when working on your Sable. Promptly wipe up any spilled fluid as it is highly toxic. Animals love its sweet taste, so even a spilling a small amount on your garage floor can end up in the dog's stomach pretty quickly. If you notice an oily surface in your coolant, immediately have your mechanic inspect your Sable for head gasket leakage

  • Advance Auto coupon for
    20% off entire order: KIOSK20