How To Open Hood: 1999 Mercury Sable LS 3.0L V6 Sedan

Mercury Sable Model Years - 1996, 1997, 1998, 1999

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

1999 Mercury Sable LS 3.0L V6 Sedan Coolant (Antifreeze) Check Coolant Level

Your coolant should perform well under any condition - just like Aaron Rodgers!

1999 Mercury Sable LS 3.0L V6 Sedan Air Filter (Cabin) Replace

Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors

1999 Mercury Sable LS 3.0L V6 Sedan Tires & Wheels Change a Flat Tire

Learn where your spare tire and jack are located before you need it on the side of the road

1999 Mercury Sable LS 3.0L V6 Sedan Battery Clean Battery & Terminals

If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 1999 Mercury Sable. Popping the hood, or bonnet, on your Sable is a two step process, you need to release the hood latch inside your Sable and then you need to release the safety latch under your hood in the front of your Sable. The video above shows you the location of both hood latches.

Sometimes, the hood on Mercurys gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your Sable, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your Sable with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older Sables, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 1999 Mercury Sable is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20