1. Getting Started - Prepare for the front turn signal change
2. Open the Hood - How to pop the hood and prop it open
3. Remove Front Turn Signal Bulb - Steps to remove a burnt out bulb
4. Helpful Hints - How to find front turn signal replacement bulb type and other hints
5. Replace Bulb - Procedures to replace the new bulb
6. More Info. - Additional information on front signal bulbs
The video above shows you how to change a burnt out front turn signal bulb on your 2000 Chevrolet K3500. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your K3500's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your K3500 is relatively easy - turn your hazard lights on and check the front of your K3500 and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your K3500, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!
Learn how to diagnose and fix minor oil leaks in your car
Low coolant levels is all to common - top yours up today