Intl. Autos helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to add transmission fluid to your 2000 Ford Explorer. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your Explorer is low, you need to add fluid through the dipstick tube. Ford has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) When adding transmission fluid to your Explorer, be sure to add it slowly as the transmission fluid capacity is reached quickly and it is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Explorer, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2000 Ford Explorer XLS 4.0L V6
Want an easy way to save $500? Rotate your tires at least three times per year2002 Ford Explorer XLT 4.0L V6
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner2000 Ford Explorer XLS 4.0L V6
The rear wiper that you forgot you had until it streaks horrifically on a rainy day? Change it now!2000 Honda CR-V EX 2.0L 4 Cyl.
See how to seal up minor power steering fluid leaks2000 Ford Explorer XLS 4.0L V6
Did you know that heat is worse for your battery than cold? Replace it every 4 years2000 Ford Explorer XLS 4.0L V6