How to Add Oil: 2000 Ford Taurus SE Comfort 3.0L V6 Wagon
Ford Taurus Model Years - 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
How to remove oil cap and add the correct oil type
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Learn where your spare tire and jack are located before you need it on the side of the road
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb
Did you know that heat is worse for your battery than cold? Replace it every 4 years
Is the clock in your car ahead or behind? Learn how to set it here!
- Honda City helped make these videos
- Feedback
- Download Ford owners manuals
The video above shows you how to add oil to your 2000 Ford Taurus. Before adding oil to your Taurus, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Taurus has a low oil level. For most Fords, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Taurus, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Taurus and how to add oil. Adding too much oil to your Taurus can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Taurus, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
- Advance Auto coupon for
20% off entire order: KIOSK20
