David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2000 Jeep Cherokee. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Cherokee's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Cherokee is relatively easy - turn your hazard lights on and check the front of your Cherokee and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Cherokee, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Unlike a waist belt, these usually become looser as they age! Learn how to check it here2000 Jeep Cherokee Sport 4.0L 6 Cyl. (4 Door)
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2000 Jeep Cherokee Sport 4.0L 6 Cyl. (4 Door)
Avoid tickets and accidents with both working headlights! New bulbs are much brighter too2000 Jeep Cherokee Sport 4.0L 6 Cyl. (4 Door)
Because you have to start somewhere2000 Jeep Cherokee Sport 4.0L 6 Cyl. (4 Door)
Got a short fuse? Don't blow a fuse, change it!2000 Jeep Cherokee Sport 4.0L 6 Cyl. (4 Door)
Don't be the guy with your third brake light burnt out2000 Jeep Cherokee Sport 4.0L 6 Cyl. (4 Door)