How To Open Hood: 2000 Toyota MR2 Spyder 1.8L 4 Cyl.

Toyota MR2 Spyder Model Years - 2000, 2001, 2002, 2003, 2004, 2005

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2000 Toyota MR2 Spyder 1.8L 4 Cyl. Lights Reverse Light (replace bulb)

White light when you back up - yup, they burn out and you can replace them with bright LEDs

2011 Toyota Avalon 3.5L V6 Bluetooth Pair Phone

Driving with your phone pressed against your ear is illegal in many places. See how to talk hands free!

2000 Toyota MR2 Spyder 1.8L 4 Cyl. Tires & Wheels Change a Flat Tire

Learn where your spare tire and jack are located before you need it on the side of the road

2000 Toyota MR2 Spyder 1.8L 4 Cyl. Lights Daytime Running Light (replace bulb)

DRLs are on more than your headlights. They burn out faster and should be replaced regularly

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 2000 Toyota MR2 Spyder. Popping the hood, or bonnet, on your MR2 Spyder is a two step process, you need to release the hood latch inside your MR2 Spyder and then you need to release the safety latch under your hood in the front of your MR2 Spyder. The video above shows you the location of both hood latches.

Sometimes, the hood on Toyotas gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your MR2 Spyder, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your MR2 Spyder with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older MR2 Spyders, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2000 Toyota MR2 Spyder is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20