Coolant Flush How-to: Chrysler LHS (1999-2001)

1. Getting Started - Prepare for the repair

2. Overview - How to determine cooling system type

3. Open the Hood - How to pop the hood and prop it open

4. Find Reservoir - Locate the coolant reservoir and clean it

5. Drain Reservoir - Remove coolant from the reservoir

6. Drain Point - Locate the drain point on the radiator

Car Displayed: 2012 Chrysler 300 Limited 3.6L V6

7. Drain Coolant - Drain the coolant from the system

8. Circulate Water - Run engine with distilled water and flush

9. Fill Coolant - Dilute coolant with distilled water and fill

10. Locate Hoses - Locate the coolant hoses and connection points

11. Burp System - Remove excess air in the cooling system

12. Replace Cap - Put the reservoir cap back on

13. Clean Up Tips - Secrets to dealing with spilled coolant

14. More Info. - Additional information on coolant flushes

 
Video Description

Adding engine coolant (also known as antifreeze) to your 2001 Chrysler LHS is pretty easy. Engine coolant circulates through your engine to keep it cool in the summer but won't freeze in the winter. Make sure to check your engine when it is cold for an accurate reading. The video above shows you where the coolant reservoir in your LHS is located and how to add coolant. Be sure to check your owners manual to determine the correct type of fluid to add - for Chryslers, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water. Some coolants will come premixed...that is, you don't need to add any water. These coolants will typically say 50/50 or pre-mixed on the front of the coolant bottle.

Removing the coolant reservoir cap on a warm engine could cause the cap to fly off at a high rate of speed and fluid to spray out of the reservoir. Always wear safety goggles when working on your LHS. Promptly wipe up any spilled fluid as it is highly toxic. Animals love its sweet taste, so even a spilling a small amount on your garage floor can end up in the dog's stomach pretty quickly. If you notice an oily surface in your coolant, immediately have your mechanic inspect your LHS for head gasket leakage

  • Advance Auto coupon for
    20% off entire order: KIOSK20
Author

Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.

2001 Chrysler LHS 3.5L V6 Lights Tail Light (replace bulb)

The burnt out tail light: classic reason for a cop to pull you over - change yours now

2012 Chrysler 300 Limited 3.6L V6 Tires & Wheels Check Tire Pressure

Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw

2001 Chrysler LHS 3.5L V6 Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2001 Chrysler LHS 3.5L V6 Power Steering Fluid Fix Leaks

If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak