Don Jacobs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2001 Ford Windstar. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Windstar's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Windstar is relatively easy - turn your hazard lights on and check the front of your Windstar and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Windstar, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Small bulbs that burn out regularly - did you know you can replace these with LED lights?2002 Ford Windstar SEL 3.8L V6
The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you2002 Ford Windstar SEL 3.8L V6
Power steering fluid is easy to check and many people (mechanics included) often forget about - learn how here2002 Ford Windstar SEL 3.8L V6
Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this2002 Ford Windstar SEL 3.8L V6
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2002 Ford Windstar SEL 3.8L V6
The burnt out tail light: classic reason for a cop to pull you over - change yours now2002 Ford Windstar SEL 3.8L V6