How to Jumpstart a 2002 Lincoln LS 3.9L V8

Lincoln LS Model Years - 2000, 2001, 2002, 2003, 2004, 2005, 2006

How to properly jump start a car with the correct cable order

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2002 Lincoln LS 3.9L V8 Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2002 Lincoln LS 3.9L V8 Tires & Wheels Check Tire Pressure

Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw

2002 Lincoln LS 3.9L V8 Lights Parking Light (replace bulb)

Small bulbs that burn out regularly - did you know you can replace these with LED lights?

2002 Lincoln LS 3.9L V8 Brake Fluid Check Fluid Level

Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to use jumper cables to jump start a dead battery in your 2002 Lincoln LS. If you get into your LS, turn the key, and your car doesn't start (you may hear nothing or a clicking sound from the engine bay), you have a dead battery and need a jump-start. Check to see if you left your headlights or an interior light on and turn the switch off. Assuming that you have a pair of jumper cables, a pair of safety glasses and a friend to give you a jumpstart, the video above will show you where to connect the cables (and in what order!) for your LS.

It is important to use the best jumper cables you can buy as they have thicker gauge (0, 2 or 4 gauge) wire and will impact how long to charge car battery with jumper cables (your LS will charge faster with thicker cables). Cheap jumper cables have very thin wire such as 8 or 10 gauge), which increases how long it will take to charge the battery with jumper cables in your LS. When you finish jumpstarting the dead battery car, which battery terminal to disconnect first is important. Be sure to disconnect the negative cable (black cable) from the ground on the dead car, then disconnect the negative cable from the ground on the donor battery, then disconnect the positive (red cable) from the donor battery and finally disconnect the positive cable from the dead car. Once you are finished reviving a dead car battery in your LS, make sure you drive it for at least 5 minutes before turning it off so your battery isn't dead the next time.

So what's up with the safety glasses? There is a small possibility of a battery exploding during the charging process if you don't connect the cables properly (causing a spark) and there is a bunch of hydrogen gas around the battery (car batteries emit hydrogen gas when they discharge) - this is much more of an issue with cars that haven't been driven for a long time than if you drive your LS regularly and simply forgot to turn your lights off.

  • Advance Auto coupon for
    20% off entire order: KIOSK20