How to Add Oil: 2002 Toyota Sequoia SR5 4.7L V8
Toyota Sequoia Model Years - 2001, 2002, 2003, 2004, 2005, 2006, 2007
How to remove oil cap and add the correct oil type
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
If you have an electrical component that doesn't work, try replacing the fuse first
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot
Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary
Did you know that heat is worse for your battery than cold? Replace it every 4 years
- Rosen helped make these videos
- Feedback
- Download Toyota owners manuals
The video above shows you how to add oil to your 2002 Toyota Sequoia. Before adding oil to your Sequoia, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Sequoia has a low oil level. For most Toyotas, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Sequoia, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Sequoia and how to add oil. Adding too much oil to your Sequoia can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Sequoia, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
- Advance Auto coupon for
20% off entire order: KIOSK20
