How to Add Oil: 2004 Chevrolet Classic 2.2L 4 Cyl.
Chevrolet Classic Model Years - 2004, 2005
How to remove oil cap and add the correct oil type
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
White light when you back up - yup, they burn out and you can replace them with bright LEDs
A check engine light can be cleared with a simple fix or it could be a major problem - find out now!
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb
- Lake Ford helped make these videos
- Feedback
- Download Chevrolet owners manuals
The video above shows you how to add oil to your 2004 Chevrolet Classic. Before adding oil to your Classic, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Classic has a low oil level. For most Chevrolets, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Classic, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Classic and how to add oil. Adding too much oil to your Classic can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Classic, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
- Advance Auto coupon for
20% off entire order: KIOSK20
