Reina helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2005 Chrysler 300. We recommend that you change both the driver and passenger side bulbs at the same time on your 300 as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your 300's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your 300 and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your 300, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2005 Chrysler 300 C 5.7L V8
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2005 Chrysler 300 C 5.7L V8
A check engine light can be cleared with a simple fix or it could be a major problem - find out now!2005 Chrysler 300 C 5.7L V8
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2005 Chrysler 300 C 5.7L V8
Learn where your air filter is located and how to determine if it needs to be changed.2005 Chrysler 300 C 5.7L V8