Rosen Nissan helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2005 Chrysler Sebring. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Sebring's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Sebring is relatively easy - turn your hazard lights on and check the front of your Sebring and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Sebring, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
A few key tips will make jacking up your car much safer2005 Chrysler Sebring Limited 3.0L V6 Coupe
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber2005 Chrysler Sebring Limited 3.0L V6 Coupe
Small bulbs that burn out regularly - did you know you can replace these with LED lights?2005 Chrysler Sebring Limited 3.0L V6 Coupe
Help keep your car as responsive as you are by maintaining proper power steering fluid levels2005 Chrysler Sebring Limited 3.0L V6 Coupe
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2005 Chrysler Sebring Limited 3.0L V6 Coupe