David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2005 Chrysler Sebring. Before adding oil to your Sebring, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Sebring has a low oil level. For most Chryslers, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Sebring, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Sebring and how to add oil. Adding too much oil to your Sebring can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Sebring, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak2005 Chrysler Sebring Limited 3.0L V6 Coupe
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?2005 Chrysler Sebring Limited 3.0L V6 Coupe
Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping2005 Chrysler Sebring Limited 3.0L V6 Coupe
Learn where your spare tire and jack are located before you need it on the side of the road2005 Chrysler Sebring Limited 3.0L V6 Coupe
If you have an electrical component that doesn't work, try replacing the fuse first2005 Chrysler Sebring Limited 3.0L V6 Coupe