Intl. Autos helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
Checking the engine coolant (also known as antifreeze) level in your 2005 Mercury Sable is pretty easy. In order to get an accurate reading, your 3.0 liter engine should be cool to the touch when you check it. Engine coolant circulates through your engine to keep it cool in the summer but won't freeze in the winter. The video above shows you where the coolant reservoir in your Sable is located and how to check the coolant level. If you need to add anti-freeze, be sure to check your owners manual to determine the correct type of coolant to add - in Mercurys, it usually located in a section titled Fluid Capacities towards the end of your manual. See our video on how to add engine coolant for tips on adding coolant to your Sable.
Always wear safety goggles when working on your Sable. Taking off the coolant reservoir cap on a warm engine could cause the cap to up explosively and fluid to spray out of the reservoir. If you notice an oily surface in your coolant, immediately have your mechanic inspect your Sable for head gasket leakage.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2005 Mercury Sable GS 3.0L V6 Sedan
Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this2005 Mercury Sable GS 3.0L V6 Sedan
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2005 Mercury Sable GS 3.0L V6 Sedan
Learn where your air filter is located and how to determine if it needs to be changed.2005 Mercury Sable GS 3.0L V6 Sedan
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2005 Mercury Sable GS 3.0L V6 Sedan
Don't be the guy with your third brake light burnt out2005 Mercury Sable GS 3.0L V6 Sedan