Honda City helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2005 Mercury Sable. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Sable's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Sable is relatively easy - turn your hazard lights on and check the front of your Sable and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Sable, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Power steering fluid is easy to check and many people (mechanics included) often forget about - learn how here2005 Mercury Sable GS 3.0L V6 Sedan
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner2005 Mercury Sable GS 3.0L V6 Sedan
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2005 Mercury Sable GS 3.0L V6 Sedan
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2005 Mercury Sable GS 3.0L V6 Sedan
Low coolant levels is all to common - top yours up today2005 Mercury Sable GS 3.0L V6 Sedan
Coolant hoses wear out over time and need to be replaced - check 'em early and often2005 Mercury Sable GS 3.0L V6 Sedan