Braeger Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2006 Chevrolet Monte Carlo. We recommend that you change both the driver and passenger side bulbs at the same time on your Monte Carlo as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Monte Carlo's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Monte Carlo and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Monte Carlo, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this2006 Chevrolet Monte Carlo LT 3.9L V6
Don't be caught in the fog with burnt out fog light bulbs2006 Chevrolet Monte Carlo LT 3.9L V6
There's no reason to check the washer fluid level without adding some - see how to do it here!2006 Chevrolet Monte Carlo LT 3.9L V6
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2006 Chevrolet Monte Carlo LT 3.9L V6
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit2007 Pontiac Grand Prix 3.8L V6
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2006 Chevrolet Monte Carlo LT 3.9L V6