David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2006 Chrysler 300. Before adding oil to your 300, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your 300 has a low oil level. For most Chryslers, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your 300, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your 300 and how to add oil. Adding too much oil to your 300 can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your 300, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Is the clock in your car ahead or behind? Learn how to set it here!2007 Chrysler 300 2.7L V6
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber2005 Chrysler 300 C 5.7L V8
A few key tips will make jacking up your car much safer2007 Chrysler 300 2.7L V6
Did you know that heat is worse for your battery than cold? Replace it every 4 years2005 Chrysler 300 C 5.7L V8
Harsh downshifts? Slipping gears? You might be low on transmission fluid2005 Chrysler 300 C 5.7L V8
Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping2005 Chrysler 300 C 5.7L V8