David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2006 Ford Explorer. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Explorer's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Explorer is relatively easy - turn your hazard lights on and check the front of your Explorer and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Explorer, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner2006 Mercury Mountaineer Convenience 4.0L V6
Coolant hoses wear out over time and need to be replaced - check 'em early and often2006 Ford Explorer Eddie Bauer 4.0L V6
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?2006 Mercury Mountaineer Convenience 4.0L V6
The rear wiper that you forgot you had until it streaks horrifically on a rainy day? Change it now!2006 Subaru Forester X 2.5L 4 Cyl.
Low coolant levels is all to common - top yours up today2006 Ford Explorer Eddie Bauer 4.0L V6
Don't be caught in the fog with burnt out fog light bulbs2006 Ford Explorer Eddie Bauer 4.0L V6