David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2006 Lincoln Zephyr. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Zephyr's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Zephyr is relatively easy - turn your hazard lights on and check the front of your Zephyr and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Zephyr, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Burnt out brake lights increase your chance of getting rear ended - check and change yours today2006 Lincoln Zephyr 3.0L V6
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner2006 Lincoln Zephyr 3.0L V6
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit2006 Lincoln Zephyr 3.0L V6
A few key tips will make jacking up your car much safer2006 Lincoln Zephyr 3.0L V6
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?2006 Lincoln Zephyr 3.0L V6
If you have an electrical component that doesn't work, try replacing the fuse first2006 Lincoln Zephyr 3.0L V6