Honda City helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2006 Lincoln Zephyr. We recommend that you change both the driver and passenger side bulbs at the same time on your Zephyr as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Zephyr's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Zephyr and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Zephyr, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit2006 Lincoln Zephyr 3.0L V6
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2006 Lincoln Zephyr 3.0L V6
Coolant hoses wear out over time and need to be replaced - check 'em early and often2006 Lincoln Zephyr 3.0L V6
White light when you back up - yup, they burn out and you can replace them with bright LEDs2006 Lincoln Zephyr 3.0L V6
Got a short fuse? Don't blow a fuse, change it!2006 Lincoln Zephyr 3.0L V6
A check engine light can be cleared with a simple fix or it could be a major problem - find out now!2006 Lincoln Zephyr 3.0L V6