Coolant Level Check: 2003-2008 6

1. Getting Started - Prepare for the repair

2. Open the Hood - How to pop the hood and prop it open

3. Find Reservoir - Locate the coolant reservoir and clean it

4. Check Level - Determine the coolant level

5. Add Coolant - Determine coolant type and add fluid properly

6. Replace Cap - Secure the coolant reservoir cap

7. Locate Hoses - Locate the coolant hoses and connection points

8. Assess Hoses - Tips for how to assess the condition of the hoses

9. More Info. - Additional information on coolant levels

 
Video Description

Checking the engine coolant (also known as antifreeze) level in your 2006 Mazda 6 is pretty easy. In order to get an accurate reading, your 2.3 liter engine should be cool to the touch when you check it. Engine coolant circulates through your engine to keep it cool in the summer but won't freeze in the winter. The video above shows you where the coolant reservoir in your 6 is located and how to check the coolant level. If you need to add anti-freeze, be sure to check your owners manual to determine the correct type of coolant to add - in Mazdas, it usually located in a section titled Fluid Capacities towards the end of your manual. See our video on how to add engine coolant for tips on adding coolant to your 6.

Always wear safety goggles when working on your 6. Taking off the coolant reservoir cap on a warm engine could cause the cap to up explosively and fluid to spray out of the reservoir. If you notice an oily surface in your coolant, immediately have your mechanic inspect your 6 for head gasket leakage.

  • Advance Auto coupon for
    20% off entire order: KIOSK20
Author

Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.

2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door) Lights Brake Light (replace bulb)

Burnt out brake lights increase your chance of getting rear ended - check and change yours today

2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door) Hoses Fix Leaks

The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you

2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door) Fuse (Interior) Replace

Got a short fuse? Don't blow a fuse, change it!

2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door) Lights Turn Signal - Front (replace bulb)

If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb