Braeger Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
Learn how to install a car seat in your 2010 Mazda 6. Regardless of whether your make has the latch system or the seat belt attachment method, this video shows how to tether a baby seat or a booster seat to the rear seats. In addition this video shows how to connect rear facing infant car seats, forward facing child seats and booster with latch seats. The connection point to your 2010 6 is then same regardless of what car seat is chosen. Note that most rear facing car seats do not utilize the center anchor point to connect the car seat but rely on the two lower anchor points exclusively. The center anchor point is typically only used for forward facing car seats. You should always defer to the owners manual for your specific car seat for size determinations and front vs rear facing recommendations.
Determining whether your child should be front facing or rear facing in your 2010 Mazda 6 is dependent on the height and weight of your child and the specific car seat model. The rear facing position is safest and children should remain rear facing as long as possible. It is imperative that newborns are always rear facing.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2010 Mazda 6 S 3.7L V6
The burnt out tail light: classic reason for a cop to pull you over - change yours now2010 Mazda 6 S 3.7L V6
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2010 Mazda 6 S 3.7L V6
Harsh downshifts? Slipping gears? You might be low on transmission fluid2010 Mazda 6 S 3.7L V6
Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary2010 Mazda 6 S 3.7L V6
Coolant hoses wear out over time and need to be replaced - check 'em early and often2010 Mazda 6 S 3.7L V6