Intl. Autos helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows to check the coolant hoses in your 2006 Mercury Milan. The coolant hoses (radiator hoses) carry engine coolant through your engine and will eventually wear out. You can avoid getting stranded by identifying signs of extreme wear before they break. In 2006 Milans with the 3.0 liter engine, coolant leaks are most likely to occur where the hoses connect to the engine, but it can also leak from the reservoir or from the hoses. Look for cracks in the hoses and analyze the brittleness or squishiness of the hoses in your Milan - if the hoses are hard to squeeze or squeeze very easily, it's time to replace them. The video above shows you where coolant hoses on your 2006 Milan Premier are located and the steps needed to analyze them.
Never attempt to replace a hose that is connected to your air conditioner - these hoses contain refrigerant that is under pressure and can blind you. AC problems are always best left to your professional mechanic.
Want an easy way to save $500? Rotate your tires at least three times per year2006 Mercury Milan Premier 3.0L V6
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2006 Mercury Milan Premier 3.0L V6
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2006 Mercury Milan Premier 3.0L V6
Your coolant should perform well under any condition - just like Aaron Rodgers!2006 Mercury Milan Premier 3.0L V6
Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw2006 Mercury Milan Premier 3.0L V6
Did you know that the sun wears out wiper blades faster than rain? Replace your blades twice a year2006 Mercury Milan Premier 3.0L V6