Braeger Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows how to change the fog light bulb in your 2006 Mercury Milan. Not all models have fog lights - for many Mercurys, it depends on your trim level (Premier) or whether the fog light option was ordered when your Milan was manufactured. Fog lights are typically in the front bumper, below the headlight cluster and are helpful in poor visibility. If one fog light is burnt out on your Milan, we recommend changing both bulbs because the working bulb will be dimmer than the one you replaced and will likely burn out soon anyway.
When you change the foglight on your Milan, be careful not touch the glass part of the bulb with your fingers which causes the bulb to burn out earlier.
See how to seal up minor power steering fluid leaks2006 Mercury Milan Premier 3.0L V6
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2006 Mercury Milan Premier 3.0L V6
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2006 Mercury Milan Premier 3.0L V6
Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping2006 Mercury Milan Premier 3.0L V6
There's no reason to check the washer fluid level without adding some - see how to do it here!2006 Mercury Milan Premier 3.0L V6
If you have an electrical component that doesn't work, try replacing the fuse first2006 Mercury Milan Premier 3.0L V6