David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you to replace the headlight in your 2006 Mercury Milan. Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs. Changing both headlight bulbs on your Milan at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side. In some Mercurys, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Mercurys have high intensity discharge headlights, sometimes referred to as xenon lights. These bulbs have a very high voltage that runs through them, even if the battery is disconnected. If your Milan has this type of bulb, we do not recommend that you attempt to change it yourself.
When you change the headlight on your Milan, it is important to not touch the glass part of the bulb with your fingers because the oil from your fingertips will cause that part of the bulb to burn hotter, which significantly shortens the life of the bulb.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2006 Mercury Milan Premier 3.0L V6
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2006 Mercury Milan Premier 3.0L V6
Learn where your spare tire and jack are located before you need it on the side of the road2006 Mercury Milan Premier 3.0L V6
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2006 Mercury Milan Premier 3.0L V6
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2006 Mercury Milan Premier 3.0L V6