Lake Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2006 Mercury Milan. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Milan's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Milan is relatively easy - turn your hazard lights on and check the front of your Milan and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Milan, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2006 Mercury Milan Premier 3.0L V6
Burnt out brake lights increase your chance of getting rear ended - check and change yours today2006 Mercury Milan Premier 3.0L V6
Did you know that heat is worse for your battery than cold? Replace it every 4 years2006 Mercury Milan Premier 3.0L V6
A/C blowing hot air?2006 Mercury Milan Premier 3.0L V6
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit2006 Mercury Milan Premier 3.0L V6
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2006 Mercury Milan Premier 3.0L V6