Braeger Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you to replace the headlight in your 2006 Toyota Sienna. Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs. Changing both headlight bulbs on your Sienna at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side. In some Toyotas, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Toyotas have high intensity discharge headlights, sometimes referred to as xenon lights. These bulbs have a very high voltage that runs through them, even if the battery is disconnected. If your Sienna has this type of bulb, we do not recommend that you attempt to change it yourself.
When you change the headlight on your Sienna, it is important to not touch the glass part of the bulb with your fingers because the oil from your fingertips will cause that part of the bulb to burn hotter, which significantly shortens the life of the bulb.
Harsh downshifts? Slipping gears? You might be low on transmission fluid2006 Toyota Sienna LE 3.3L V6
Small bulbs that burn out regularly - did you know you can replace these with LED lights?2006 Toyota Sienna LE 3.3L V6
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2006 Toyota Sienna LE 3.3L V6
Because you have to start somewhere2006 Toyota Sienna LE 3.3L V6
If you have an electrical component that doesn't work, try replacing the fuse first2006 Toyota Sienna LE 3.3L V6
The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you2006 Toyota Sienna LE 3.3L V6