1. Getting Started - Prepare for the repair
2. Remove Bulb - Steps to remove a burnt out bulb
3. Helpful Hints - How to find replacement bulb type and other hints
4. Replace Bulb - Procedures to replace the new bulb
5. More Info. - Additional information on changing reverse lights
The reverse light is the white light that lights up when your Colorado is in reverse. The video above shows you how to change the reverse light in your 2007 Chevrolet Colorado. These bulbs burn out occasionally and help you see when you are backing up. The reverse light gets dimmer over time and we suggest changing them in pairs.
Try not to touch the glass part of the new bulb with your finger when changing the reverse light in your Colorado, the oil in your finger will cause the that part of the reverse light bulb to burn hotter out therefore burn out quicker. Using gloves or a piece of paper towel will limit the potential of touching the bulb.
Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.
Did you know that heat is worse for your battery than cold? Replace it every 4 years
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb
See how to seal up minor power steering fluid leaks
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner