Rosen Nissan helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2007 Chrysler 300. Before adding oil to your 300, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your 300 has a low oil level. For most Chryslers, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your 300, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your 300 and how to add oil. Adding too much oil to your 300 can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your 300, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2007 Chrysler 300 2.7L V6
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2007 Chrysler 300 2.7L V6
Don't be the guy with your third brake light burnt out2007 Chrysler 300 2.7L V6
Did you know that the sun wears out wiper blades faster than rain? Replace your blades twice a year2007 Chrysler 300 2.7L V6
A few key tips will make jacking up your car much safer2007 Chrysler 300 2.7L V6