David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2007 Chrysler PT Cruiser. Before adding oil to your PT Cruiser, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your PT Cruiser has a low oil level. For most Chryslers, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your PT Cruiser, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your PT Cruiser and how to add oil. Adding too much oil to your PT Cruiser can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your PT Cruiser, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2007 Chrysler PT Cruiser Limited 2.4L 4 Cyl.
There's no reason to check the washer fluid level without adding some - see how to do it here!2007 Chrysler PT Cruiser Limited 2.4L 4 Cyl.
If you have an electrical component that doesn't work, try replacing the fuse first2007 Chrysler PT Cruiser Limited 2.4L 4 Cyl.
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2007 Chrysler PT Cruiser Limited 2.4L 4 Cyl.
Learn where your air filter is located and how to determine if it needs to be changed.2007 Chrysler PT Cruiser Limited 2.4L 4 Cyl.
Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary2007 Chrysler PT Cruiser Limited 2.4L 4 Cyl.