How to Add Refrigerant to a 2007 Chrysler Sebring Limited 2.4L 4 Cyl.
Chrysler Sebring Model Years - 2007, 2008, 2009, 2010
Where the low pressure A/C port is on 2007 Sebring and how to add add freon
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Is the clock in your car ahead or behind? Learn how to set it here!
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb
If your transmission is running low on fluid, be sure to add some - find out how to do this here!
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot
- Lake Chevy helped make these videos
- Feedback
- Download Chrysler owners manuals
When the air conditioner in your 2007 Chrysler Sebring starts blowing hot air, you likely have a freon leak. Recharging the freon in your AC system is an inexpensive and easy first step to restoring the cooling capacity of your A/C system. Most refrigerants include a leak sealer that will seal small leaks in addition to filling the R134a freon. The A/C system in your Sebring consists of a compressor that is belt-driven, an evaporator and freon. If there is a problem with your compressor or evaporator, adding freon will not restore cooling.
How do you recharge AC in a 2007 Chrysler Sebring? The low side AC port location is the first thing to find when you are looking for how to put freon in a car. Once you find the 2007 Sebring AC low pressure port cap, hook up the can of refrigerant to the low pressure port. When your compressor kicks on, add freon to the correct pressure. In addition to cooling, freon lubricates the compressor when it runs. Typically the AC recharge kit you buy will have enough capacity to add enough freon to get the AC in your Sebring to blow cold air.
What type of refrigerant does a 2007 Chrysler Sebring use? Air conditioning systems can vary so it is critical that you check the sticker in the engine bay to determine your Sebring refrigerant type. There is an AC sticker in the engine bay of your 2007 Sebring that indicates if it requires R134a refrigerant or the newer R1234YF type to do a recharge. You cannot add R1234YF refrigerant to a R134a system nor can you add R134a refrigerant to a R1234YF system. R134a and R1234YF have different low pressure port types, so you should never use a recharge adapter to add the wrong type of refrigerant. Recharging your Sebring with the wrong type of freon can make the AC recharge cost much higher!
- Advance Auto coupon for
20% off entire order: KIOSK20
