Replace Flat Tire with Spare Tire: 2007 Chrysler Sebring Limited 2.4L 4 Cyl.

Chrysler Sebring Model Years - 2007, 2008, 2009, 2010

1. Getting Started - Prepare for the repair

2. Find Spare Tire Kit - Locate all of the components for your spare tire jack kit

3. Pre-Jack List - Things to do before jacking up vehicle

4. Position Jack - Assemble components and position jack

5. Raise Vehicle - Use the jack to safely raise the vehicle

6. Replace Jack - Secure jack kit components back in place

7. Flat Tire Tips - Tips on dealing with a flat tire

8. More Info. - Additional information on flat tires

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Learn how to change a flat tire using the Chrysler Sebring spare tire kit. Make sure you are in a safe area that is level and free of traffic before attempting to fix a flat tire. This video shows you where the spare tire, jack and jack kit is located in your Sebring how to assemble the components of the spare tile tool kit, how to replace the flat tire with your spare tire and safety precautions to take when using your jack. Most Chrysler jack kits include the jack, a jack handle and a lug nut wrench. The video also shows how to put the 2007 Chrysler Sebring back in its original location.

Which way does the spare tire go on? The Sebring spare tire should always be mounted with the valve stem (the thing you put air into) pointing out. If you cannot see the valve stem, the spare tire on Sebring is mounted backwards. In addition, if your Sebring has a donut spare (a small spare tire), then you should mount it on one of the rear wheels when you are in a safe area to do so. What is the maximimum speed for a spare tire? If your Sebring has a donut spare, the maximum speed is likely 50 miles per hour. Some trucks have full-size spare tires, which would have the same speed limits as the other tires. How many miles can be driven on a spare tire? If it is a donut spare tire, you should not drive more than 50 miles on a donut spare tire.

While following the instructions provided in your Sebring's owners manual and in this video will help minimize the risk of injury. The best way to avoid injury is to never get under your vehicle while it is jacked up. Remember also, that even if your car is jacked up properly, another car could hit it and knock it over; therefore, be sure to give careful consideration to your environment before raising your car.

  • Advance Auto coupon for
    20% off entire order: KIOSK20
2007 Chrysler Sebring Limited 2.4L 4 Cyl. Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2007 Chrysler Sebring Limited 2.4L 4 Cyl. Fuse (Engine) Replace

If you have an electrical component that doesn't work, try replacing the fuse first

2010 Chrysler Sebring LX 2.7L V6 Sedan (4 Door) Air Filter (Cabin) Replace

Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors

2007 Chrysler Sebring Limited 2.4L 4 Cyl. Power Steering Fluid Add Fluid

Help keep your car as responsive as you are by maintaining proper power steering fluid levels