Don Jacobs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to open the hood in your 2008 Chrysler Town and Country. Popping the hood on your Town and Country is a two step process, you need to release the hood latch inside your Town and Country and then you need to release the safety latch under your hood in the front of your Town and Country. The video above shows you the location of both hood latches. Sometimes, the hood on Chryslers gets stuck and won't pop up after the interior latch is released. If this occurs on your Town and Country, simply pull up on the hood and it should pop up for you to release the second latch. Sometimes, especially on older Town and Countrys, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2008 Chrysler Town and Country is probably stuck in the "open" position - push the release lever back and forth several times and then try to close your hood.
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2008 Chrysler Town and Country Touring 3.8L V6
Want an easy way to save $500? Rotate your tires at least three times per year2008 Chrysler Town and Country Touring 3.8L V6
Burnt out brake lights increase your chance of getting rear ended - check and change yours today2008 Chrysler Town and Country Touring 3.8L V6
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2008 Chrysler Town and Country Touring 3.8L V6
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2008 Chrysler Town and Country Touring 3.8L V6
White light when you back up - yup, they burn out and you can replace them with bright LEDs2008 Chrysler Town and Country Touring 3.8L V6