Braeger Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to add transmission fluid to your 2008 Chrysler Town and Country. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your Town and Country is low, you need to add fluid through the dipstick tube. Chrysler has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) When adding transmission fluid to your Town and Country, be sure to add it slowly as the transmission fluid capacity is reached quickly and it is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Town and Country, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2008 Chrysler Town and Country Touring 3.8L V6
Is the clock in your car ahead or behind? Learn how to set it here!2013 Chrysler Town and Country Touring 3.6L V6 FlexFuel
Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw2013 Chrysler Town and Country Touring 3.6L V6 FlexFuel
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2008 Chrysler Town and Country Touring 3.8L V6
There's no reason to check the washer fluid level without adding some - see how to do it here!2009 Volkswagen Routan SEL 4.0L V6
Learn how to diagnose and fix minor oil leaks in your car2009 Volkswagen Routan SEL 4.0L V6