Lake Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2008 Dodge Caliber. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Caliber's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Caliber is relatively easy - turn your hazard lights on and check the front of your Caliber and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Caliber, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Avoid tickets and accidents with both working headlights! New bulbs are much brighter too2008 Dodge Caliber SE 2.0L 4 Cyl.
The rear wiper that you forgot you had until it streaks horrifically on a rainy day? Change it now!2007 Dodge Caliber SXT 2.0L 4 Cyl.
Is the clock in your car ahead or behind? Learn how to set it here!2007 Dodge Caliber SXT 2.0L 4 Cyl.
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2007 Dodge Caliber SXT 2.0L 4 Cyl.
Coolant hoses wear out over time and need to be replaced - check 'em early and often2008 Dodge Caliber SE 2.0L 4 Cyl.