Braeger Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2008 Ford Edge. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Edge's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Edge is relatively easy - turn your hazard lights on and check the front of your Edge and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Edge, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2008 Ford Edge SE 3.5L V6
Harsh downshifts? Slipping gears? You might be low on transmission fluid2008 Ford Edge SE 3.5L V6
Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this2008 Ford Edge SE 3.5L V6
If you have an electrical component that doesn't work, try replacing the fuse first2008 Ford Edge SE 3.5L V6
Learn where your air filter is located and how to determine if it needs to be changed.2008 Ford Edge SE 3.5L V6
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner2008 Ford Edge SE 3.5L V6