Check Oil Level 2007-2014 GMC Yukon

1. Getting Started - Prepare for the repair

2. Open the Hood - How to pop the hood and prop it open

3. Remove Dipstick - Locate, remove and wipe oil dipstick

4. Read Oil Level - Reinsert dipstick, remove and then read oil level

5. More Info. - Additional information on the oil level

Share on   Share on Twitter   Share on Facebook
Parts & Tools
Video Description

Checking the oil in a Yukon is fairly easy and should be done once a month. Note that most GMC have an oil pressure gauge next to the speedometer - this gauge does not tell you what your oil level is, however the video above will show you how check the oil level in your 2008 GMC Yukon. Make sure your engine is cold when you check the oil in your Yukon. Otherwise the dipstick will read slightly low. In addition to checking the oil level, you also want to look at the condition of the oil when you have the dipstick out. If the oil in your Yukon is dirty or smells like gasoline, you probably need an oil change.

If you notice that the oil level in your Yukon is extremely low or empty, fill it up and check it again the next time you drive. If it is extremely low again, have your mechanic take a look before driving it much more.

  • Advance Auto coupon for
    20% off entire order: KIOSK20

Author

Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.

2008 GMC Yukon Denali 6.2L V8 Lights Headlight (replace bulb)

Avoid tickets and accidents with both working headlights! New bulbs are much brighter too

2008 GMC Yukon Denali 6.2L V8 Brake Fluid Check Fluid Level

Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping

2008 GMC Yukon Denali 6.2L V8 Tires & Wheels Change a Flat Tire

Learn where your spare tire and jack are located before you need it on the side of the road

2008 GMC Yukon Denali 6.2L V8 Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb