1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Remove Cover - Locate engine fuse box and remove cover
4. Locate Bad Fuse - Find the fuse that is tied to the bad component
5. Remove Fuse - Take out the fuse in question and assess if blown
6. Replace Cover - Secure the cover and test component
7. More Info. - Additional information on engine fuses
If your convenience lights, turn signals, seat warmers, stereo, headlights or other electronic components suddenly stop working, chances are you have a fuse that has blown out. The video above shows how to check and change blown fuses in the engine bay of your 2008 Jeep Compass in addition to where the fuse box diagram is located. Fuses should always be the first thing you check if your Compass is experiencing electrical difficulties because they are relatively easy and inexpensive to change yourself. The more electronics your Compass has, the more fuses it has. Some Jeeps have multiple fuse boxes in the engine bay, so be sure to find the fuse(s) in question. Some components may have multiple fuses, so make sure you check all of the fuses that are linked to the component that is no longer working properly.
If you need to replace a blown fuse in your Compass, make sure you replace it with one that has the same amperage as the blown fuse. If checking and replacing the fuse for the component in question doesn't work, we recommend seeking assistance from a trusted professional mechanic. They should be able to figure out if the component needs to be replaced or if there is a short or some other problem with your Compass.
Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb
Help keep your car as responsive as you are by maintaining proper power steering fluid levels
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!
Don't be the guy with your third brake light burnt out