David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2008 Mazda 3. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your 3's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your 3 is relatively easy - turn your hazard lights on and check the front of your 3 and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your 3, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Did you know that the sun wears out wiper blades faster than rain? Replace your blades twice a year2006 Mazda MPV LX 3.0L V6
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door)
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?2008 Mazda 3 S 2.3L 4 Cyl. Hatchback
If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak2006 Mazda 6 i 2.3L 4 Cyl. Sedan (4 Door)
If your transmission is running low on fluid, be sure to add some - find out how to do this here!2008 Mazda 3 S 2.3L 4 Cyl. Hatchback
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?2008 Mazda 3 S 2.3L 4 Cyl. Hatchback