How to Add Brake Fluid: 2008 Mercury Mariner 3.0L V6

Mercury Mariner Model Years - 2005, 2006, 2007, 2008, 2009, 2010, 2011

1. Getting Started - Prepare for the repair

2. Open the Hood - How to pop the hood and prop it open

3. Find Reservoir - Locate the brake fluid reservoir and clean it

Car Displayed: 2011 Ford Escape XLT 3.0L V6 FlexFuel info

4. Check Level - Determine the brake fluid level

Car Displayed: 2011 Ford Escape XLT 3.0L V6 FlexFuel info

5. Add Fluid - Determine brake fluid type and add fluid properly

6. Replace Cap - Secure the brake fluid cap onto the reservoir

Car Displayed: 2011 Ford Escape XLT 3.0L V6 FlexFuel info

7. More Info. - Additional thoughts on adding brake fluid

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

When you hit the brake pedal in your 2008 Mercury Mariner it pumps brake fluid down to your brakes which increases the pressure to make your car slow down. If you don't have enough brake fluid in the brake fluid reservoir, air can get in your brake lines and your Mariner won't stop properly. The video above shows you how to add brake fluid to your Mercury Mariner. If you are adding brake fluid to your Mariner on a regular basis, you should check for leaks (we have a video for this too!) As with most fluids in your engine, brake fluid can cause serious harm if you get it in your eyes, so be sure to wear safety glasses and gloves. Brake fluid will also make your paint peel off if you spill it on your Mariner, so be careful not to spill it.

When adding fluid to your Mariner, it is important to check your owners manual for the correct type to add - it likely be either DOT 3, DOT 4 or DOT 5, also known as silicone brake fluid. Do not shake the fluid before pouring it in your vehicle - the air bubbles will foul up your brake lines. Be sure to discard bottles of brake fluid that are over a year old - brake fluid sucks the moisture out of the air and the water vapor in the fluid can rust out your brake lines quickly. Brake fluid breaks down with use and should be changed every 2 years in your Mercury Mariner or whenever it looks dark in color - this will make the internal brake components last longer.

  • Advance Auto coupon for
    20% off entire order: KIOSK20
2008 Mercury Mariner 3.0L V6 Lights Turn Signal - Front (replace bulb)

If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2009 Mercury Mariner 2.5L 4 Cyl. Air Conditioner Recharge Freon

If your car blows hot air when your air conditioner is turned on, try recharging the freon first

2009 Mercury Mariner 2.5L 4 Cyl. Lights Brake Light (replace bulb)

Burnt out brake lights increase your chance of getting rear ended - check and change yours today

2011 Ford Escape XLT 3.0L V6 FlexFuel Windshield Washer Fluid Check Fluid Level

There's no reason to check the washer fluid level without adding some - see how to do it here!