Rosen Nissan helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2008 Toyota 4Runner. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your 4Runner's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your 4Runner is relatively easy - turn your hazard lights on and check the front of your 4Runner and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your 4Runner, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak2008 Toyota 4Runner SR5 4.0L V6
A/C blowing hot air?2003 Lexus GX470 4.7L V8
See how to seal up minor power steering fluid leaks2008 Toyota 4Runner SR5 4.0L V6
The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you2008 Toyota 4Runner SR5 4.0L V6
There's no reason to check the washer fluid level without adding some - see how to do it here!2008 Toyota 4Runner SR5 4.0L V6
Low coolant levels is all to common - top yours up today2008 Toyota 4Runner SR5 4.0L V6