David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2008 Toyota 4Runner. We recommend that you change both the driver and passenger side bulbs at the same time on your 4Runner as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your 4Runner's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your 4Runner and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your 4Runner, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2008 Toyota 4Runner SR5 4.0L V6
Avoid tickets and accidents with both working headlights! New bulbs are much brighter too2008 Toyota 4Runner SR5 4.0L V6
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2008 Toyota 4Runner SR5 4.0L V6
Burnt out brake lights increase your chance of getting rear ended - check and change yours today2003 Lexus GX470 4.7L V8
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2008 Toyota 4Runner SR5 4.0L V6
See how to seal up minor power steering fluid leaks2008 Toyota 4Runner SR5 4.0L V6