David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2008 Toyota Highlander. We recommend that you change both the driver and passenger side bulbs at the same time on your Highlander as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Highlander's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Highlander and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Highlander, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Harsh downshifts? Slipping gears? You might be low on transmission fluid2008 Toyota Highlander Sport 3.5L V6
Your coolant should perform well under any condition - just like Aaron Rodgers!2008 Toyota Highlander Sport 3.5L V6
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2008 Toyota Highlander Sport 3.5L V6
Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping2008 Toyota Highlander Sport 3.5L V6
If you have an electrical component that doesn't work, try replacing the fuse first2008 Toyota Highlander Sport 3.5L V6
There's no reason to check the washer fluid level without adding some - see how to do it here!2008 Toyota Highlander Sport 3.5L V6