David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2009 Ford Flex. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Flex's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Flex is relatively easy - turn your hazard lights on and check the front of your Flex and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Flex, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2009 Ford Flex SEL 3.5L V6
Don't be caught in the fog with burnt out fog light bulbs2009 Ford Flex SEL 3.5L V6
If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak2009 Ford Flex SEL 3.5L V6
The rear wiper that you forgot you had until it streaks horrifically on a rainy day? Change it now!2009 Ford Flex SEL 3.5L V6
Got a short fuse? Don't blow a fuse, change it!2009 Ford Flex SEL 3.5L V6
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2009 Ford Flex SEL 3.5L V6