Lake Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2009 Ford Flex. Before adding oil to your Flex, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Flex has a low oil level. For most Fords, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Flex, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Flex and how to add oil. Adding too much oil to your Flex can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Flex, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Want an easy way to save $500? Rotate your tires at least three times per year2009 Ford Flex SEL 3.5L V6
Coolant hoses wear out over time and need to be replaced - check 'em early and often2009 Ford Flex SEL 3.5L V6
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2009 Ford Flex SEL 3.5L V6
Learn where your spare tire and jack are located before you need it on the side of the road2009 Ford Flex SEL 3.5L V6
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?2009 Ford Flex SEL 3.5L V6