David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2009 Jeep Liberty. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Liberty's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Liberty is relatively easy - turn your hazard lights on and check the front of your Liberty and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Liberty, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
There's no reason to check the washer fluid level without adding some - see how to do it here!2009 Jeep Liberty Sport 3.7L V6
The rear wiper that you forgot you had until it streaks horrifically on a rainy day? Change it now!2011 Jeep Liberty Sport 3.7L V6
Your coolant should perform well under any condition - just like Aaron Rodgers!2009 Jeep Liberty Sport 3.7L V6
If you have an electrical component that doesn't work, try replacing the fuse first2009 Jeep Liberty Sport 3.7L V6
Harsh downshifts? Slipping gears? You might be low on transmission fluid2009 Jeep Liberty Sport 3.7L V6