Lake Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2009 Toyota Tacoma. Before adding oil to your Tacoma, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Tacoma has a low oil level. For most Toyotas, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Tacoma, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Tacoma and how to add oil. Adding too much oil to your Tacoma can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Tacoma, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2008 Toyota Tacoma 2.7L 4 Cyl. Extended Cab Pickup (4 Door)
Coolant hoses wear out over time and need to be replaced - check 'em early and often2009 Toyota Tacoma Pre Runner 4.0L V6 Crew Cab Pickup (4 Door)
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit2009 Toyota Tacoma Pre Runner 4.0L V6 Crew Cab Pickup (4 Door)
See how to seal up minor power steering fluid leaks2009 Toyota Tacoma Pre Runner 4.0L V6 Crew Cab Pickup (4 Door)
Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping2009 Toyota Tacoma Pre Runner 4.0L V6 Crew Cab Pickup (4 Door)