Don Jacobs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2010 Chevrolet Malibu. We recommend that you change both the driver and passenger side bulbs at the same time on your Malibu as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Malibu's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Malibu and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Malibu, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2010 Chevrolet Malibu LT 2.4L 4 Cyl.
Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!2010 Chevrolet Malibu LT 2.4L 4 Cyl.
Because you have to start somewhere2010 Chevrolet Malibu LT 2.4L 4 Cyl.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2010 Chevrolet Malibu LT 2.4L 4 Cyl.
Did you know that the sun wears out wiper blades faster than rain? Replace your blades twice a year2010 Chevrolet Malibu LT 2.4L 4 Cyl.
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2010 Chevrolet Malibu LT 2.4L 4 Cyl.